Smoke Black Housing Headlights For 2006-2011 Honda Civic 2Dr Coupe Headlamps

Description

Feature :

Completely sealed: Prevents moisture from being trapped inside the housing

One-way vent: Drives out moisture and avoids lens misting

Multi-surface reflectors: Increase light output & distance 

PC lens: Impact resistance for an enhanced driving experience in any environment.

Specification :

Made of materials that meet or exceed OEM requirements.

High Beam Bulb: 9005 (Bulbs are not Included)

Low Beam Bulb: 9006 (Bulbs are NOT included)

Signal Light Bulbs: 3457A Bulbs (Bulbs are NOT included)

Black Housing Smoke Lens Clear Reflector

Fitment :

For 2006 2007 2008 2009 2010 2011 Honda Civic 2 Door Coupe

PART NUMBER: 3151-SVA-A11,33101-SVA-A11

Package Include :

1 Pair of Headlights (Driver & Passenger Side)

Please Note :

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.

2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

5. 【Test your results】

Condensation DOES NOT Indicate Crack

It s normal when there is condensation accumulated inside headlights. Condensation occurs because a lot of reasons, such as temperature differences, low-pressure areas drawing moisture in winter, etc. It won t affect the optical functions of headlights

How to Drive Away Temporary Condensation

1. Check that vents aren t blocked and switch on the low beams for about 20 mins

2. Take the headlight bulb out and clear moisture

3. Put a silica gel packet in the housing to soak up the moisture